Pages

Showing posts with label tyres. Show all posts
Showing posts with label tyres. Show all posts

Basic Information - Transmission and Data Aquisition


Transmission
We have discussed about a basic kart and some information in our previous posts. Today, we will see how the transmission of a kart is different from a normal car and how it withstands all the pressure while racing on the tracks.
A kart do not have differential. As there is no differential, one tyre on the rear axle slides while cornering. The cars which we use in our daily lives, have a differential on the rear axle which helps the vehicle to take perfect turns on the road and helps tyre wear as well.

This condition is taken care while designing the kart. The chassis is made so that the inside rear tyre lifts up slightly when the kart turns the corner. This allows the tire to lose some of its grip and slide or lift off the ground completely.


Like in cars, power is transmitted from engine to the rear axle by the means of a chain arrangement. The chain drives the power from engine to the axle sprocket which in turn drives the rear axle and the rear wheels. The power ratio between the engine and the axle sprocket has to be adapted according to track configuration so that the engines gives it’s best performance on the track.

When karting was born, there were direct drives only. But as science grew direct drives proved to be inconvenient which led to the centrifugal clutch for the club level classes. For example, in Rotax Max championship, dry centrifugal clutches are used. Since then it has become the norm as the top international classes have switched to 125 cc clutched engines. The date from which this was effective is January 2007.



Data acquisition

Kart racing is popularizing because of the bottle-neck competition within micro-seconds. The results can’t be finalized using a human being with a video footage of the live race, so various devices are used to measure the precision. Several of these systems have been developed specially for kart racing; to measure the RPM, timing of laps (including sectors) and number of laps, best lap, cooling system temperature and sometime speed or even gear for shifter karts.


These systems allow the driver to monitor from a display fixed on the steering wheel. Some of those systems are able to record (logging) laps data from the sensors, allowing replay of an entire running session and/or direct download to a personal computer equipped with data analysis software. More sophisticated systems allow for more information such as lateral and longitudinal acceleration (or G-force), throttle position, steering wheel position, brake pressure, etc.



Keep checking our blogs for updates.

Toodles.

Chetan Vengurlekar

Basic Information - Tyres

The wheel and tyres of a kart are much smaller than those used in a normal car. Tyres are mounted on the rim which is on the axle of the kart. Rims are made of magnesium alloy or aluminium. Tyres can support cornering forces in excess of 2 G (20 m/s²), depending on chassis, engine, and motor setup. These tyres are specially designed for fast paced racing. They help you to stay on tracks and around tight corners without going off-track. The figure shows the nomenclature of a kart tyre. When you buy a kart tyre on an international level, the specifications are given in the order of tread width, overall diameter and rim diameter.

 
Types of tyres

There are two types of racing tyres viz. slick and grooved tyres. Slick tyres are used for dry racing and grooved tyres are used for wet/rainy racing.

Slicks
There are various brands of slick racing tyres to choose from which include Dunlop, Vega and Bridgestone to name a few. These kart wheels or tyres are specially designed to make as much contact as possible with the track underneath of you to ensure excellent grip and a precise centre of gravity for the kart. This helps the kart to stick on the track and nail those corners increasing speed. The tread is made of a thin layer of rubber that includes a various amount of compounds that make the tyre have either, really good grip or have a greater resistance to wear. Slick kart tyres come in many different compounds, from very soft (maximum grip) to very hard (amusement and rental karts, less grip but long life span).


Rains
Rain tyres are specially designed to help you race in the rain. Some people hate it, but with the right knowledge and some practice racing in the rain can be just as fun as in the sun. They are grooved and are made of soft compound. They are also narrower than slicks. Not all racing classes allow rain tyres. The grooves in the rain tyres reduce the amount of contact area that a slick tyre would give and therefore help keep you on the track. They are constructed the same way as slicks in the way that they have a compounded rubber tread surface that can again be made for more grip or resistance to wear depending on the compound type.


 
Tyre Pressures
What is the pressure at which a kart should ideally run? This can be of personal preference to some racers. Generally, on an average day when the track is dry and you have your slicks on, a good pressure to start at is around 14 psi to 16 psi. Once you get out racing on the track your tyres will heat up and the pressure inside will build. Depending on how hot it is outside you can expect the pressure to rise between 1 psi to 3 psi. You can then add or release pressure depending on how you feel out on the track. Some people also split up the pressures and add more on the front kart wheels or tyres and less on the back or visa-versa to improve their cornering. It’s a good habit to start checking your tyres before you go out on the track each time. This ensures your pressures are good and that you don’t have a tyre malfunction like a leak causing a flat tyre.
If you are racing with rain tyres, you may want to increase the pressure by about 1 psi to 5 psi. Once the track dries out though, ensure you change back to slicks, as soon as possible. If you don’t, your rain tyres could get worn out quickly.
Tyre Wear
How do you know when it’s time to change your kart wheels or tyres? If you have been racing for a while, you can feel when your tyres need to be replaced. You won’t feel as smooth through the corners which can affect your speed and you may even feel in less control of the kart because it won’t “stick” to the track as well. A good indicator is the kart tyre itself. On slick tyres and wet/rain tyres there are small holes that indicate how much rubber has been worn off. When these holes get shallow it’s an indication that the rubber has been worn out and you probably have to change tyres.

Keep checking our blogs for updates.

Toodles.

Chetan Vengurlekar